Acrylic keychains can be personalized in full color with your photo or other graphics, and will last for years. The key fobs are available in a variety of shapes and sizes and come with the hardware as pictures. A gift anyone would enjoy receiving, they're perfect for gift shops or fundraisers!

Pressing instructions:

Acrylic key fob

Size: 1.730"x3.018"x.157"

***DO NOT MIRROR YOUR DESIGN!***

Will come with protective coating on both sides.  

Leave protective masking on the clear side of the acrylic sheet. Remove the protective masking on the white side of the acrylic sheet.

Place the acrylic sheet blank with white layer face down onto the printed image. Secure the sheet blank to the transfer paper with heat tape.

To avoid paper edge crease lines from forming on the acrylic sheet, it is recommended to have the sublimation transfer paper sized larger than what the final laser cutout shape will be.

Place blowout paper or Teflon sheet onto the heat press platen.

Place the acrylic sheet blank with attached transfer onto the blowout/Teflon sheet, transfer on top

IMPORTANT: Make sure protective masking is attached to the clear side of the acrylic sheet before heat pressing.
• Place another piece of blowout paper or Teflon sheet on top of the transfer sheet.
• Close and press for recommended time.
• When finished, open heat press and carefully remove the acrylic sheet.

IMPORTANT: Use caution when removing the transfer paper from the acrylic, as the acrylic will be soft from the heat of the press. Discard the transfer paper once removed.  

Heat press settings:
Temperature - 360-365 degrees F
Time - 105 seconds
Pressure - Medium